377432CP 377432CP Refrigiwear Extreme Softshell X Back Jacket

• Over 600g insulating power
• Soft 100% polyester shell
• Water-repellent, wind-tight finish
• 2 Zippered hand-warmer pockets, 1 zippered chest pocket, 1 zippered pocket on left sleeve
• Waterproof zippers on chest and sleeve pockets
• 2 Stall pencil pocket on left sleeve
• Dual front zipper system to regulate temperature
• Adjustable inner waist seal for draft protection
• Adjustable cuffs
• Inset cuff with thumb holes creates wind seal
• ANSI Type R, Class 3
• CSA Class 2, Level 2
• 2” Silver Reflective Tape with X shape on back
• Stitchless bonded tape for increased durability
• Soil-resistant Teflon® coating

• Size S, Sizes, M, L, XL, 2XL, 3XL, 4XL, 5XL

374540CP 374540CP Port & Co Fan Favorite Blend Tee

No matter what you are a fan of, this ultra-soft ring spun cotton/poly blend tee will match your enthusiasm.

• 4.5-ounce, 60/40 ring spun cotton/poly
• CVC blend
• Removable label for comfort and relabeling
• 1x1 rib knit neck
• Shoulder to shoulder taping
• Due to the polyester blend in this fabric results may vary depending on equipment and pre-treat used. Please consult with your supplier for recommendations. Testing pre-production is always recommended. White is not recommended for DTG printing.

• Size Small, Medium, Large, X Large, 2X Large, 3X Large, 4X Large

Size Chart

Size	S	M	L	XL	2XL	3XL	4XL
Chest	35-37	38-40	41-43	44-46	47-49	50-53	54-57

PC455LS Port & Co Long Sleeve Fan Favorite Blend Tee

No matter what you are a fan of, this ultra-soft ring spun cotton/poly blend tee will match your enthusiasm.

• 4.5-ounce, 60/40 ring spun cotton/poly
• CVC blend
• Removable label for comfort and relabeling
• 1x1 rib knit neck
• Shoulder to shoulder taping
• Due to the polyester blend in this fabric results may vary depending on equipment and pre-treat used. Please consult with your supplier for recommendations. Testing pre-production is always recommended. White is not recommended for DTG printing.

• Size Small, Medium, Large, X Large, 2X Large, 3X Large, 4X Large

Size Chart

Size	S	M	L	XL	2XL	3XL	4XL
Chest	35-37	38-40	41-43	44-46	47-49	50-53	54-57

View Product Specification

400809CP 400809CP Cordova VS281 COR-BRITE Type R Class 2 Surveyors Safety Vest

• Type R, Class 2 Surveyors Vest
• Lime Solid Polyester Front, Lime Mesh Polyester Back
• Zipper Closure
• 2-Inch Reflective Tape
• 11 Pockets: Eight Outside, Three Inside
• Accommodates Pad/Pen, Radio/Phone & Flashlight
• Dual Mic Tabs

• Size Small, M, L, XL, 2XL, 3XL, 4XL, 5X Large

374543CP 374543CP Port & Company Ladies Fan Favorite Blend V--Neck Tee

No matter what you are a fan of, this ultra-soft ring spun cotton/poly blend tee will match your enthusiasm.

• 4.5-ounce, 60/40 ring spun cotton/poly
• CVC blend
• Removable label for comfort and relabeling
• 1x1 rib knit neck
• Shoulder to shoulder taping
• Due to the polyester blend in this fabric results may vary depending on equipment and pre-treat used. Please consult with your supplier for recommendations. Testing pre-production is always recommended. White is not recommended for DTG printing.

• Size XS, Small, Medium, Large, X Large, XXL, 3X Large, 4X Large

Size Chart

Size	XS	S	M	L	XL	XXL	3XL	4XL
Size	2	4/6	8/10	12/14	16/18	20/22	24/26	28/30
Bust	32-34	35-36	37-38	39-41	42-44	45-47	48-51	52-55

View Product Specification

374545CP 374545CP Port Authority Full Length Apron w/ Pockets

This apron has a soil release finish and gives you full length protection.

• 7-ounce,100% cotton twill with soil-release finish for added stain protection
• Two waist-level patch pockets, pen pocket
• 1-inch wide neck and waist ties, adjustable neck strap
• Measures 22"w x 30"l
• No soil-release finish on Washed Denim.

• Size ONE SIZE

View Product Specification

378440CP 378440CP Ironwear 1840 Class 3 Hi-Vis Short Sleeve Black Bottom T-Shirt

• Lime moisture wicking 3.8 oz polyester fabric with Black bottom
• Class 3, ANSI / ISEA 107-2015
• 2" Silver, heat transfered reflective tape in tread pattern
• Short sleeve
• 1 Pocket - 1 front chest pocket

• Size S, M, L, XL, 2XL, 3XL, 4XL, 5XL

378442CP 378442CP Ironwear Hi Vis Black Bottom LS Pocket Shirt

• Lime moisture wicking 3.8 oz polyester fabric with Black bottom
• Class 3, ANSI / ISEA 107-2015
• 2" Silver, heat transfered reflective tape in tread pattern
• Short sleeve
• 1 Pocket - 1 front chest pocket

• Size S, M, L, XL, 2XL, 3XL, 4XL, 5XL

10193232 MSA V-Gard 4-Point Ratchet Suspension Full Brim Hardhat Kit

• ANSI Classification: Type 1, Class E
• Head Protection Material: Polyethylene
• Head Protection Suspension Type: Ratchet (4-Point)
• Fits Hat Size: 6.5 to 8
• Head Protection Venting: No
• Head Protection Graphics: No Graphics
• Hard Hat ANSI Type: 1
• Hard Hat ANSI Class: C, E
• Series: V-Gard
• Hard Hat Style: Full Brim
• Suspension Adjustment Type: Ratchet
• Hard Hat Suspension: 4 pt. Ratchet
• Number of Suspension Points: 4
• Accessory Slots: Yes
• ANSI Electrical Class: C, E
• ANSI Impact Type: 1
• Shell Material - Head Protection: Polyethylene

5123 / 5124 GSS Safety Non-ANSI Reflective Short Sleeve T-Shirt

• Birdseye with Moisture Wicking Properties
• Stretchable Heat Transfer Tape
• One Front Left Chest Pocket 
• Sizes M-5XL
• Certification: Non-ANSI Certified

• Size Small, M, L, XL, 2XL, 3XL, 4XL, 5X Large

374850CP 374850CP Port Authority Reflective Sandwich Bill Cap

• Fabric: 100% brushed cotton twill
• Structure: Unstructured
• Profile: Low
• Closure: Hook and loop

• Size ONE SIZE

374874CP 374874CP Radians SV59 Type R Class 2 Heavy Duty Surveyor Safety Vest

• Woven Fabric Bias Tape & Heavy Black Webbing Reinforcement.
• Pockets: Front: Large Radio/Cell Phone with Clear Badge Holder, Split Pencil/Tablet, 2 EA Full. with Flap Cover. Inside: 2 EA Lower Full Width, Flap Covered Chest. Back: Plan Pocket (across the entire back).
• Silver 2" Class 2 Glass Bead Reflective Tape.
• Closure: Heavy Metal Chrome Snaps. Grommets at neck for tool keepers/lanyards.
• Materials: 100% Polyester Mesh & 100% Polyester Solid Twill (pockets).
• Two layer back pocket the width of the entire back of vest, reinforced snap closure on both sides.
• Pocket opening the length of the side of the vest from bottom to arm pit.
• Meets ANSI/ISEA 107 Standards.

• Size Small, M, L, XL, 2XL, 3XL, 4XL, 5XL

375801CP 375801CP Ironwear Class 2 FR vest With ID Pocket

Features high visibility silver refl ective tape in suspender
pattern over top of shoulders as well as 360° continuous
refl ective and bands encircling the torso, 2 radio clip
holders and clear ID badge holder.

Flame Retardant Properties: The treated
fabric on this vest has been tested under
test method D6413 and will Self-Extinguish
when caught on fi re. (After fl ame is less than
2.0 seconds average; Char length is less
than 6” on average; and there is no melting
or dripping). This vest should never be used
where an Arc fl ash or Flash Fire is present.
 

• Size Sizes, M, L, XL, 2XL, 3XL, 4XL, 5XL

385672CP 385672CP PIP Type R CL 3 Two Tone Break Away Vest

• Breathable polyester mesh
• 5 point breakaway
• 2" two tone tape for optimum visibility
• Hook and loop closure
• 2 lower internal pockets
• 2 upper chest pockets including 4 pen pockets
• Available in hi-vis lime yellow and hi-vis orange

• Size Small, M, L, XL, 2XL, 3XL, 4XL, 5XL

465283 MSA Topgard 4-Point Fas-Trac III Ratchet Suspension Red Hard Hat

• Durable polycarbonate shell features uniridge design
• Retains limited resistance to top impact or penetration over a wide range of temperatures
• Good for general industry, as well as construction, oil & gas, utilities, and mining industries
• Fits hat sizes 6 1/2 to 8
• Complies with ANSI Z89.1, Type I, Class E standards
• SEI Certified

375329CP 375329CP Pyramex Ridgeline Cap Style Hard Hat 4 Point Ratchet Suspension

4-position harness points — Allows you to move the harness forward, backward, up or down – allowing for the most optimal position for ultimate comfort

Replaceable sweat band — Padded fabric and polyurethane foam for all day wear

Vented pressure pad — Keeps the straps in place providing an additional level of comfort

Easy to grasp knob — Adjusts the suspension from 6 1/2 to 8

Swinging hinge points — Allows you to find the most comfortable position on the back of your head

Universal accessory slots

Please reverse orientation, high temperature (HT) and low temperature (LT) 

Custom imprinting available

375247CP 375247CP MSA V-Gard Fast Trac 3 Ratchet Suspension Full Brim Hard Hat

Fast trac 3 rachet suspension

Rugged full brim head protection ensures additional coverage for face, neck, & shoulders

Extended back brim provides protection from the sun, as well as a run-off for rain and snow

Short front brim shades the face, and allows excellent visibility

Features shock-absorbing 4-point suspension, adjustable crown straps, nape strap, and headband with Cushionaire™ sweatband

Fits head sizes 6 1/2 to 8

Complies with ANSI Z89.1, Type I, Class E and G standards

364679CP 364679CP Radians ST11W Class 2 Women's Safety Shirt

Max-Dri™ Moisture Wicking Mesh Technology

2" Segmented Heat Transfer Reflective Tape

V-Neck for easy on/off and secure comfort

Materials: 100% Wicking Polyester Mesh

Meets ANSI/ISEA 107 Standards

• Size Sizes, Small, M, L, XL, 2XL, 3XL

401433CP 401433CP Ergodyne GloWear 8249Z Economy Surveyor Safety Vest

GloWear 8249Z Features:

• HIGH VISIBILITY – ANSI/ISEA 107, Type R Class 2 compliant with 2” reflective tape for low-light visibility
• SOLID FRONT & MESH BACK – Lightweight 3.6oz polyester solid front with breathable 3.3oz polyester mesh back
• EASY ON & OFF – Zipper closure
• POCKETS – 2 interior, 2 exterior for storage of cell phones, tablets, pens and more
• MIC TAB – For convenient radio access
• DUAL SIZING – To fit a range of body sizes
• MACHINE WASHABLE

• Size XS, Small / Medium, Large / X Large, 2X Large / 3 X Large, 4X Large / 5X Large

197588CP 197588CP Radians SV7 Type R Class 2 Surveyor Safety Vest

• Closure: Zipper.
• 2" silver tape reflective material. 1 horizontal stripe.
• Pockets: 1 split pad/pencil, 1 radio, 2 each lower flap covered, 2 each deep inside pockets.
• Materials: 100% polyester knit front, 100% polyester mesh back.
• Meets ANSI/ISEA 107 Standards.

• Size Medium, Large, X Large, 2X Large, 3X Large, 4X Large, 5X Large

384633CP 384633CP Under Armour Team Chino Hat

Fabric:

• Woven chino fabric is lightweight and super durable
• Built-in HeatGear® sweatband wicks away sweat to keep you cool and dry

Feature:

• 6-panel, unstructured, low-profile
• Precurved visor
• Adjustable cloth strap closure
• Embroidered UA label on left side

323949CP 323949CP Petzl Vertex Vented Helmet

Description

• Very comfortable:
  - six-point textile suspension conforms perfectly to the shape of the head
  - CENTERFIT feature allows perfect centering of the helmet on the head, thanks to its two side adjustment wheels
  - FLIP&FIT system allows the headband to be positioned in a low position, guaranteeing that the helmet fits securely on the head. The system folds into the shell for easy storage and transportation
  - comes with interchangeable standard comfort foam
• Protection designed for work at height and on the ground:
  - DUAL chinstrap allows the worker to adjust chinstrap strength in order to adapt the helmet to different environments: work at height (EN 12492) or on the ground (EN 397). The clip has two positions, corresponding to these two uses: high strength, limiting the risk of losing the helmet during a fall, and low strength, limiting the risk of strangulation if the helmet is snagged while the user is on the ground
  - shock absorption achieved through deformation of the outer shell
  - vent holes with sliding shutters allow the ventilation to be adjusted as needed, while wearing the helmet
• Modular accessories:
  - eye shield with EASYCLIP side attachment system for easy installation
  - Petzl headlamp with mounts, or headlamp with elastic headband
  - helmet protector keeps the shell free from soiling and paint splash
  - nape protector provides effective sun and rain protection for the nape of the neck
  - nametag holder allows user to be easily identified
  - changeable chinstrap and foam
  - hearing protection
  - available in seven colors: white, yellow, red, black, orange, blue and green
  - also comes in two high-visibility versions: yellow and orange

Specifications

• Head circumference: 53-63 cm
• Weight: 490 g
• Material(s): ABS (acrylonitrile butadiene styrene), nylon, polycarbonate, high-strength polyester, polyethylene
• Certification(s): CE, EN 397, EN 12492, ANSI Z89.1 Type I Class C, UKCA, EAC

7714CP R 7714CP R SHOWA 14" Jersey Lined Rough PVC Coated Chemical Resistant Gloves

• Fully coated, rough finish gloves offer durability value, and protection
• Resists abrasion, punctures, and tears
• Jersey liner keeps hands comfortable
• Sanitized® to reduce bacterial growth
• Ideal for petrochemical handling, refining, automotive subassembly, mining, construction, and applications where slick or abrasive objects are handled

374303CP 374303CP Radians SJ610B Weatherproof Parka with Zip-Out Reversible Bomber Jacket

• Color Blocked Bottom
• Dual Mic Tabs
• 1 Horizontal Stripe
• 2” Silver Reflective Tape With Contrast
• Zipper Closure
• Outer Material - 300D PU Coated Oxford Polyester with Taped Seams
• Parka has Stowable Hood
• Parka has Rib Knit Cuffs
• Parka has 6 pockets - Radio, Vertical Zip Phone, 2 Flap Covered Welt, 2 Inner Open
• Parka has Black Quilted Taffeta Lining, 160gsm
• Bomber is Reversible with Removable Sleeves
• Bomber is Class 3 with Sleeves, Class 2 without
• Bomber has Elastic Sleeve Cuffs
• Bomber has Rib Knit Bomber Style Collar
• Bomber has 7 Pockets - Vertical Zip Phone, 2 Flat Covered Patch, 2 Side Entry, 2 Open Patch
• Bomber Black Side is Black Peached Polyester Coated TPU 120gsm

• Size Small, M, L, XL, 2XL, 3XL, 4XL, 5X Large

CS802 Corner Stone ANSI 107 Safety Cap

• Fabric: 55/45 poly/polypropylene
• Structure: Lightly structured
• Profile: Low
• Features: ANSI/ISEA 107-certified accessory
• 1-inch reflective band around crown
• Closure: Micro hook and loop

View Product Specification